| Zhao Hongfu,Zhao Zhipeng,Han Dongmei,et al.A method for determination of dwell position offset of ring applicator using GafchromicTM EBT3 film and ImageJ software[J].Chinese Journal of Radiological Medicine and Protection,2018,38(11):865-869 |
| A method for determination of dwell position offset of ring applicator using GafchromicTM EBT3 film and ImageJ software |
| Received:April 10, 2018 |
| DOI：10.3760/cma.j.issn.0254-5098.2018.11.013 |
| KeyWords:Brachytherapy Applicator reconstruction GafchromicTM EBT3 ImageJ |
| FundProject:国家自然科学基金项目（31600679） |
| Author Name | Affiliation | E-mail | | Zhao Hongfu | Department of Radiation Oncology, China-Japan Union Hospital of Jilin University, Changchun 130033, China | | | Zhao Zhipeng | Department of Radiation Oncology, China-Japan Union Hospital of Jilin University, Changchun 130033, China | | | Han Dongmei | Department of Radiation Oncology, China-Japan Union Hospital of Jilin University, Changchun 130033, China | | | Cheng Guanghui | Department of Radiation Oncology, China-Japan Union Hospital of Jilin University, Changchun 130033, China | chengghcjuh@sina.com |
|
| Hits: 3782 |
| Download times: 1879 |
| Abstract:: |
| Objective To report a simple method for determination of dwell position offset of ring applicator using GafchromicTM EBT3 film and ImageJ software. Methods In the dummy plan, this study reconstructed the ring applicator point by point manually according to the MR line marker, the most distal reconstruction point was at the end of marker, set the offset to zero. The first, eleventh, and twenty-third dwell positions were activated with the step length of 2.5 mm. A setup image was designed to immobilize the ring applicator. The setup image was composed of two perpendicular thin lines and a circular with a diameter of 16 mm. GafchromicTM EBT3 film was fixed behind the setup image by plastic tapes. After irradiation, a ruler was put on the bottom of the irradiated film as a plotting scale. Photos were taken with the help of a vertical camera using a tripod. The file was imported into ImageJ software and the coordinate values were obtained by semi-automatic recognition of the center of exposure area. The test was repeated five times at one week interval to evaluate the uncertainty. For every time, each dwell position was measured five times. Results The angle between the radius of the first dwell position and the x-axis was 43° in the dummy plan, and (46.8±0.9)° for actual measurement. The offset was 0.9 mm for the ring applicator combined with the MR according to calculation. The distances between the first,the eleventh and the twenty-third dwell positions and the center of the ring were (12.9±0.1) mm, (12.5±0.1) mm, (12.4±0.1) mm, respectively. Conclusions Using GafchromicTM EBT3 film and the ImageJ software is a simplified method to validate the dwell position offset of the ring applicator. |
| HTML View Full Text View/Add Comment Download reader |
| Close |
|
|
|
